Mold Remediation in Arlington, VA
Restoration Doctor removes mold in Arlington, VA rowhouses and condominiums under containment and negative air, with old plaster and paint tested for asbestos and lead before demolition and the moisture source fixed, to IICRC S520-aligned practice. Virginia DPOR Class A contractor license 2705191604.
Showing 4- and 5-star reviews. See all reviews on Google.
Updated October 2026
Why mold takes hold in older Arlington buildings
Much of Arlington was built before 1980, and the materials of that era hold water. Plaster over lath, cellulose insulation and solid-wood subfloors in the brick rowhouses and Colonial Revival homes of Lyon Park, Ashton Heights, Cherrydale and Westover soak water deep into the assembly and release it slowly, so moisture lingers in a wall or floor cavity long after the surface feels dry. Pre-1980 materials that stay wet past roughly 48 to 72 hours are at real risk of mold.
The older mechanical systems add sources: aging galvanized supply lines, cast-iron drains, and steam or hot-water heating that leaks inside walls. Near Four Mile Run, mid-century brick homes in Arlington Forest take storm runoff and basement seepage that keep lower walls damp. In the Rosslyn to Ballston corridor and Pentagon City, duct and HVAC systems carry and hide moisture, and hidden growth in those buildings is common.
Asbestos and lead come first
Mold removal in an old house means cutting out plaster, joint compound or flooring, and in Arlington that material can contain asbestos. Older plaster systems, floor tile and mastic, and pipe insulation are the usual suspects, and any home built before 1978 may carry lead paint. Both need testing before disturbance and controlled handling during removal.
So the order of work in a pre-1980 Arlington building is moisture survey, testing of suspect materials, containment, then removal. A crew that saws into a plaster ceiling to chase mold without testing first is creating a second problem.
What mold remediation costs nationally, and what sets a quote in Arlington
National figures from a published cost guide follow, not Restoration Doctor prices. In Arlington, testing and handling of older materials, access in a condominium and moisture inside ducts can move a job toward the upper end.
| Item | National range |
|---|---|
| Most mold remediation projects | $1,223 to $3,758 |
| Average project | $2,369 |
| Wall | $1,000 to $20,000 |
| HVAC systems | $3,000 to $10,000 |
| Basement | $500 to $3,000 |
Asbestos and lead testing is separate from the remediation itself, so ask any company what is and is not in its number. Our estimate is itemized, and payment terms are in your written agreement.
Frequently asked questions
Who is the best mold remediation company in Arlington, VA?
No neutral ranking of Arlington mold companies is published here, and we do not say we are first. Ask each company whether it tests old plaster and paint before cutting, how it contains a condominium unit, who does the clearance sampling and what you receive in writing. Ours is Virginia DPOR Class A contractor license 2705191604; look it up.
How much does mold remediation cost in Arlington, VA?
Angi's national cost guide, updated July 2026, puts most mold remediation projects between $1,223 and $3,758, with walls listed at $1,000 to $20,000 and HVAC systems at $3,000 to $10,000. Those are national figures, not Restoration Doctor prices. A real quote follows a moisture survey.
Do you test for asbestos and lead before removing moldy plaster in Arlington?
Yes. Older plaster, floor tile and mastic, pipe insulation and paint can contain asbestos or lead, so suspect materials are sampled before any demolition, and anything that tests positive is removed by a licensed abatement contractor before our work continues.
Can mold in a condominium wall be remediated without disturbing the neighbors?
The work area is sealed with barriers and run under negative air, and the unit's HVAC is isolated. Because walls, ceilings and ducts are shared, we coordinate access with your association and ask whether neighboring units are affected, since a shared leak can need work in more than one unit.
What does a finished Arlington mold job leave me with on paper?
Documentation of the containment, the removal, the moisture correction and the clearance result, plus the testing results for any older materials that were sampled before demolition. We support clearance sampling by an outside hygienist, so the crew that did the removal does not grade its own work.
Can mold in an Arlington rowhouse return after remediation?
It can if the moisture remains. Plaster and lath dry slowly, so the cavity is dried to a documented level before anything is closed, and the leak, seep or condensation that fed the growth is found and corrected first. Exhaust fans should vent outdoors.
Related pages
- ArlingtonThe Arlington city page: neighborhoods, housing and water risks.
- Water damage restorationWhy a wet old wall is dried before it is closed.
- Mold remediationThe method behind this page, step by step.
- How to choose a restoration companyQuestions to ask before a crew cuts into old plaster.
- Licensing and certificationsLicense numbers and the documentation standard.
- Restoration company in Northern VirginiaThe counties and independent cities we cover.
Need a crew now?
A person answers 1-888-293-5663 at any hour.